ECO LED LAMP by NeoNail.
Professional UV / LED lamp 12W / 36. It quickly and easily cures gels, hybrid varnishes and other light-curing preparations. It has 3 convenient operating modes: 30 seconds, 60 seconds and 90 seconds, so you can individually adjust the time to your needs. It has been enriched with a motion sensor that automatically turns on the lamp and starts curing the nails. A special digital display allows you to constantly monitor the lamp's operating time. The lamp is equipped with 12 LED diodes, which ensure long operating time. The lamp is small, light and handy, so there will be no problems with its storage and transport.
- UV/LED lamp.
- It has a display.
- Includes a motion sensor and 3 operating modes.
- Cures hybrid varnishes, gels and other light-curing preparations.
THE PACKAGE INCLUDES:
- LED lamp,
- AC adapter,
- warranty card,
- user manual.
Directions for use
1. Connect the power supply to the lamp power connector.
2. After turning on the device, select the lamp operating time using the Timer:
single use of the button – 30s
pressing the button twice – 60s
pressing the button three times – 90s
Once the Timer mode is selected, the display will show the time remaining until the end of the exposure.
3. If during the time selected by the Timer, the hand is pulled out from under the lamp, the time stops and the display shows the time remaining until the end of the exposure. To restart the lamp for the remaining time, the hand must be pushed back under the lamp. Pressing the Timer button again will select the next Timer time (e.g. from 30s to 60s).
4. If the Timer buttons are not used, the infrared sensor will start working when you put your hand into the lamp. The maximum operating time of the lamp without starting the Timer is 99 seconds. If the lamp is started using the motion sensor, the active operating time counter will be displayed.
2. After turning on the device, select the lamp operating time using the Timer:
single use of the button – 30s
pressing the button twice – 60s
pressing the button three times – 90s
Once the Timer mode is selected, the display will show the time remaining until the end of the exposure.
3. If during the time selected by the Timer, the hand is pulled out from under the lamp, the time stops and the display shows the time remaining until the end of the exposure. To restart the lamp for the remaining time, the hand must be pushed back under the lamp. Pressing the Timer button again will select the next Timer time (e.g. from 30s to 60s).
4. If the Timer buttons are not used, the infrared sensor will start working when you put your hand into the lamp. The maximum operating time of the lamp without starting the Timer is 99 seconds. If the lamp is started using the motion sensor, the active operating time counter will be displayed.
Producer
Cosmo Group Sp. z o.o.
ul. Jasielska 10A
60-476 Poznań
PL
znn@neonail.com
https://www.neonail.pl/
+48 612 502 439
The expiration date/batch number shown in the photos is indicative.
Popular categories NeoNail
Popular series NeoNail
It may also interest you
