NeoNail - DUO ACRYLGEL - Acrylic-gel Product for the Extension and Modeling of Nails - 15 g

Directions for use

Application with Tipsa Duo Acrylgel:
1. Gently matt the nail plate with a polishing block, remove any dust with a brush and wash the nails with Cleaner.
2. Push back the cuticles and, if necessary, cut them with nippers.
3. To increase adhesion, apply a thin layer of HARD BASE and cure in a LED or UV lamp according to the table.*
*If you have a problematic nail plate, you can also use Primer.
4. Apply the appropriate amount of product to the inside of the tip, taking into account the correct structure of the "C curve" (a small amount of product should be around the cuticles and on the free edge and more in the middle of the tip). In order to smooth the product on the tip and achieve the desired length, use a brush soaked in Cleaner.
5. Place the prepared tip on the nail plate, pressing gently. If the product gets on the cuticles, soak the brush with Cleaner and then remove the dirt. Cure in the LED 48 lamp for 30-60 seconds.
6. After removing your hand from the lamp, gently remove the tip from the nail. Then, give it its final shape with a 180-grit file and smooth it out with a polisher.
***We can also make any styling you want, according to your preferences
7. Apply a layer of HARD TOP to give a very distinctive shine. Cure in a LED or UV lamp, then wash with Cleaner.

Application using a template:
1. Gently buff the nail with a buffing block. Push back the cuticles, if necessary remove them with nippers.
2. Place the form (template) under the nail. Apply the product to 3/4 of the nail surface, then gently stretch the product down to obtain the desired length. Soak the brush in the cleaner so that it does not stick to the product. Cure in a 48 LED lamp for 60 seconds. If we have a problematic nail plate, we can apply a thin layer of HARD BASE or Base Extra and cure in a 48W LED lamp according to the table. We can also use Primer.
3. After removing your hand from the lamp, remove the form and then re-apply the product on 3/4 of the nail surface, then stretch gently up (under the cuticles) and down to cover the entire nail. The brush should be soaked in a cleaner so that it does not stick to the product. Cure in a LED lamp 48 60 sec.
4. After hardening, file the nail to the desired shape using a 180-grit file.
5. Apply a layer of HARD TOP to give a very distinctive shine. Cure in a LED or UV lamp, then wash with a cleaner.