NeoNail - Repair Base - Keratin & Bioton - Hybrid UV / LED Base - 7.2 ml

Repair Base - Keratin & Bioton by NeoNail.

Hybrid base. It is perfect for manicures and pedicures. It can be used on weakened, thin and brittle nails. It has strengthening, hardening and building properties. It not only extends the durability of styling, but also the nail plate by up to 7 mm. The formula was enriched with vitamins A, C, E, biotin, creatine and silicon. The medium-dense, transparent consistency of the product facilitates the application and perfectly harmonizes with any shade of hybrid varnish. It does not require the use of a top or primer.

• Hybrid base.
• For weakened, thin and brittle nails.
• Strengthens, hardens and lengthens.
• Contains beneficial ingredients.

HOW TO USE:

Version without the application of colored hybrid varnish:
1. Gently polish the nail with a polisher, remove the dust formed, then rinse with a Cleaner.
2. Apply a thin layer of Repair Base on the prepared nail plate, cure in a LED or UV lamp according to the table.
3. Apply a second, slightly thicker layer on the natural nail and on the template (if you decide to extend it). Cure the whole in a LED or UV lamp according to the table. To obtain the proper structure of the nail, the operation should be repeated.
4. After hardening, gently remove the template and smooth the nails with a 180 grit file. Remove the dust formed, then rinse with a cotton pad soaked in Cleaner.
5. Finally, apply a thin layer of the same Repair Base product, cure in a LED or UV lamp according to the table. After curing, rinse the sticky layer with Cleaner.

Version with the application of colored hybrid varnish:
1. Gently polish the nail with a polisher, remove the dust formed, then rinse with a Cleaner.
2. Apply a thin layer of Repair Base on the prepared plate, cure in a LED or UV lamp according to the table.
3. Apply a second, slightly thicker layer on the natural nail and on the template (if you decide to extend it). Cure the whole in a LED or UV lamp according to the table. To obtain the proper structure of the nail, the operation should be repeated.
4. After hardening, gently remove the template and smooth the nails with a 180 grit file. Remove the dust formed, then rinse with a cotton pad soaked in Cleaner.
5. Apply a layer of hybrid varnish in the selected color and cure in the LED or UV lamp according to the table (the darker the color, the longer the curing time). Repeat the operation to obtain a depth of color.
6. At the end, apply a thin layer of Hard Top, cure in a LED or UV lamp according to the table. After curing, rinse the sticky layer with Cleaner.